第
2
页，总
4
页
4.
instructions
：
4.1
The first step is to turn on the cable Settings in the host as shown below
：
4.2 POWER ON/OFF
：
4.2.1 POWER ON
：
press the "HOME" button for 3 second to activate the controller, and the four LED
racing flashes once per second
。
4.2.2 POWER OFF
：
Press the "HOME" button for 1 seconds to close the controller
。
4.3 connect
：
4.3.1
SWITCH host press and hold the "Y" button and then press the "HOME" button to start up the
pairing, four LED racing flashing,1 second 2 times, connected to the current LED light long
bright.(LED1 is bright if it is the first machine connection, and LED2 is bright if it is the second,
and so on)
。
4.3.2
The android platform, press A and press HOME again. LED2+LED3 Quick flashing,
LED2+LED3 lights up after successful connection
。
4.3.3
Connect the gamepad to the computer with the USB Micro data cable, which is the x-input key
value gamepad
。
4.4
Low power prompt
：
4.4.1
The current connection light flashes twice per second
。
4.4.2
Shutdown voltage
：
3.2V
。
4.5
Charging tips
：
4.5.1
Charging in the connected state of the handle: the light in the current mode of the charging line
