6
Cooperating with the PX277 configurator
The PX804-T settings can be changed by connecting to the PX277
(PxArt+ Settings Controller) configurator. It allows in connection with PX804-T
to define the following parameters: DMX address for brightness (in the range
of 1 – 512) and device behavior in the absence of DMX signal (programmable
scene).
When the lamp is connected to the configurator, the PX804-T will restart.
6.1 Available parameters
DMX Addr.
– changing the DMX address of the brightness channel in the
range 1 – 512,
No Signal –
behavior of the device when the DMX signal disappears:
•
Scene
– setting the scene displayed when the DMX signal disappears,
•
On
– switching the lamp on at 100%,
•
Off
– complete shutdown of the lamp,
•
Hold
– maintaining the last value of DMX signal,
No Signal Time
– device reaction time after the disappearance of the DMX
signal (0.0 – 10s),
Smooth
– smooth changes in DMX signal value (
OFF
/
Level 1 – 4
),
Control mode
– operating mode selection:
•
1ch MONO
– 1 DMX channel for brightness control,
Driver temp.
– a list of the lowest, highest and current operating temperature
of the power supply,
10
