PXM PX763, Руководство пользователя

Страница: 6 / 35

4 DMX signal connection
PX763 must be connected to DMX line in series. This means that DMX IN
terminals in the device must be provided with a driving cable, and then from
DMX OUT connector the driving cable must be provided to other DMX
receivers.
If PX763 is the last device in DMX
line, "DMX+" and "DMX-" terminals must
be provided with the
terminator-resistor of 120 Ohm.
5 Meaning of displayed messages
DMX address of the device – the basic position in the MENU
setting of the parameters for all channels simultaneously
setting of the parameters for each channel separately
setting of DMX address
selection of the driving method
selection of the response to the lack of DMX signal
driving in the effective mode
switching on of all outputs at 100%
6