5.15.1
Restore default settings
To restore the device to its default settings, press and hold the “
previous
”
key while switching on the device. One of the messages that will be displayed
will say
dFl
, which means successful restoring to default settings (the
“
previous
” key has to be held down while powering on the device, until the
dFl
message is displayed).
If this message is accepted by pressing “
enter
”, the default settings will be
restored. The user can also exit this menu level without restoring the default
settings. In order to do this, press the “
escape
” key.
Please note that after restoring to default settings, all the operating
parameters of the device will revert to the following ones:
•
DMX address: 1
•
driver operating mode: RGBW (4b – 4 byte)
•
master mode: off
•
number of sent DMX channels: 128
•
white balance: off
•
screensaver: off
•
control curve: EP1 (version
L0
)
•
no signal operating mode: scene (all channels controlled by 50%)
•
frequency: 366Hz
(488Hz version
L0
)
•
smooth function: off
(001 version
L0
)
27
ESC
PRESSED PREV
ENTER
