2
Safety conditions
PX703 Touch Panel 10" is a device powered with safe voltage 12 – 24V
DC or with the use of PoE (Power over Ethernet) in IEEE 802.3af standard,
however, during its installation and use it is essential to follow the below
safety rules:
1. The device may only be connected to 12 – 24V DC or PoE in IEEE
802.3af standard with current-carrying capacity compatible with
technical data.
2. All the conductors should be protected against mechanical and
thermal damage.
3. In the event of damaging any conductor, it should be replaced with a
conductor of the same technical data and attestation.
4. All repairs and connections of outputs can only be made with cut off
power supply.
5. PX703 should be strictly protected against contact with water and
other liquids.
6. All sudden shocks, particularly dropping, should be avoided.
7. The device cannot be turned on in places with humidity exceeding
90%.
8. The device cannot be used in places with temperature lower than +2°C
or higher than +40°C.
9. Clean with damp duster only.
5
