Default sett.
Default sett.
PREV+NEXT > 2s
PREV+ NEXT
Default sett.
Reset OK
Model
PX390 +6 MW
9x
NEXT
ENTER
PX390 default setting:
ź
Color address
001
ź
Brightness address
001
ź
Scene color
128
ź
Scene brightness
128
ź
Invert color
Off
ź
Flicker free
On
ź
Smooth
Time
ź
Smooth time
200 [ms]
6.2.7
Response to lack of DMX signal
In case of no DMX signal, the scene executed is the one whose parameters are adjusted by the
user using [
Scene color
] and [
Scene brightness
] options. This function is used to gain control of
LEDs without connecting an external controller.
Automatic connection of DMX signal will stop the executed scene and the lamp will operate in
accordance with the parameters of the control signal.
The change of scene colour and brightness is possible directly from the lamp (buttons) or with the
use of PX277. These values can be set between 0 and 255.
Scene bright.
000 *
ENTER
Scene bright.
255 *
NEXT
Scene bright.
128
[
Scene color
] – if set to 0, changes the
colour temperature value of the lamp to
warm, and 255 to cold. 128 sets the neutral
colour temperature. Values between the
above values correspond to the colours
between the described extreme colours
(warm white and cold white). If the [Invert
colour] option is enabled, the warm
temperature colour of the lamp has the value
of 255, and cold – 0.
[
Scene brightness
] – if set to 0, it turns off
the scene, and 255 turns it on at 100%. 128
means that the scene brightness is set to
50%. After changing the value of scene
brightness, the operation has to be
confirmed by pressing "enter” or “escape”.
Scene color
000 *
ENTER
Scene color
255 *
NEXT
Scene color
128
Model
PX390 +6 MW
3x
NEXT
NEXT
12