2
Safety conditions
DMX/DALI/DMX Interface is powered with safe voltage 24V DC; however,
during its installation and use the following rules must be strictly observed:
1. The device may only be connected to 24V DC current (stabilized
voltage) with current-carrying capacity compatible with technical data.
2. All the conductors should be protected against mechanical and
thermal damage.
3. In the event of any conductor damaging, it should be replaced with the
one of the same technical data.
4. Connection of DMX signal should be made with shielded conductor.
5. All repairs and connections of outputs or DMX signal can only be
made with power off.
6. PX255 should be strictly protected against contact with water and
other liquids.
7. All sudden shocks – particularly dropping – should be avoided.
8. The device cannot be turned on in places with humidity exceeding
90%.
9. The device cannot be used in places with temperature lower than +2°C
or higher than +40°C.
10. For cleaning use only a damp cloth.
4
