7.3 DALI>>>DMX (DALI to DMX) patching
This option allows to enter the converted brightness value of the virtual
ballast onto a given DMX channel. First of all, you can change the virtual DALI
ballast address with the specified number, which is assigned to the selected
channel DMX. It is also possible to send a zero value to a specified DMX-512
channel (it has to be set to zero – the screen visible below on the right).
To change the default values you need to carry on as follows: select a
specific ballast using the keys or and confirm by pressing
enter
. Then the
selected option is highlighted in blue, and the using buttons or you can
change the value of the DALI ballast virtual number assigned to a specific
DMX channel or a zero value (when to the channel DMX-512 is not sent any
value). The selected value has to be confirmed by pressing the
enter
button.
N
otes:
Number of visible virtual ballast depends on the amount of equipment
declared by the user when selecting the menu number DALI ballast
DALI
→
Virtual ballasts
.
The default value is the maximum number of 64 virtual ballast, but when
it is necessary it can be reduced.
17
