During its installation and use PX
229
the following rules must be strictly
observed:
1. Installation should be performed by a person holding the appropriate
qualifications, according to the instruction manual.
2. Lamp may only be connected to stabilized voltage with
current-carrying capacity compatible with technical data.
3. All the conductors should be protected against mechanical and
thermal damage.
4. In the event of damaging any conductor, it should be replaced with
a conductor of the same technical data.
5. All repairs and connections of outputs can only be made with cut off
power supply.
6. Do not connect to the power supply to device with visible damage.
7. All sudden shocks, particularly dropping, should be avoided.
8. Do not plug the device into the installation if you suspect that the
casing is leaking.
5
