1. GENERAL DESCRIPTION
1
ATTENTION:
2. SAFETY CONDITIONS
PX126 Mirage RedLine is powered
from standard 230 V grid, what can cause electric
shock when safety rules are not observed. Therefore it is necessary to observe the following:
1. The device can be connected to the mains through the enclosed power cable only.
2. Controller can be connected to socket which has protecting instalation in working order (3 -
wire grid) only.
3. All the conductors should be protected against mechanical and thermal damage.
4. In the event of damaging any conductor, it should be replaced with a conductor of the same
technical data and attestations.
5. All repairs demanding casing opening should be made with cut off power supply.
6. Controller should be strictly protected against contact with water and other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. Device with damaged (cracked) casing should not be connected to the mains.
9. The device cannot be turned on in places with humidity exceeding 90%.
o
o
10. The device cannot be used in places with temperature lower than 2 C or higher than 40 C.
11. Cleaning with damp duster only - PX126 has to be cut off the power supply.
directly
For user comfort two modes of "moved slider" are available:
1. "10%" - the programmed device starts to react when the control slider has been moved for at
least 6 milimeters.
2. "interception" - the programmed device starts to react when the control slider's value exceeds
(regardless of the direction) the programmed value for the particular DMX channel.
For the description of selection of sliders' reaction mode see page 13.
PX126 Mirage
RedLine II
is a versatile DMX controller for scanners, stage lighting or advertising
lighting installations control. With PX126 the user can control any device compatible with the
DMX-512 standard, as the dimmers, smoke generators, colours' changers, central effects or
scanners and heads, for which the controller is mainly intended.
Mirage RL controls 256 DMX channels, that are divided into sixteen 16-channel groups. In a
single group the user can control one 16-channel device or a few devices, that are controlled
through lower number of DMX channels (eg. sixteen 1-channel dimmers).
As for the programming, the controller allows to define 48 programs, consisting of up to 1022
scenes. The entirely new feature is the possibility of simultaneous rendering of up to three
programs with the different speeds. The maintenance comfort is extended by the maximal
simplification of programs' saving and rendering processes.
By dint of RS-232 interface the Mirage controller can be connected to the PC computer.
