PXM Merger DMX 3/1, Руководство пользователя

Страница: 12 / 44

4.3.3 DMX input mapping
In the [Input x] menu (from 1 to 3) you can set the mapping for each input:
•
[Input start] – beginning of the range of DMX channels sent to the
output, set in the range 1 – 512,
• [Input end] – end of the range of DMX channels sent to the output, set
in the range 1 – 512, this parameter cannot be set to a value lower
than in [Input start],
•
[Output start] – starting DMX address on the output to which the
channels are to be sent, set in the range 1 – 512,
•
[No signal] – behavior of the device when the DMX signal disappears,
possible options to choose from:
◦ Hold – maintaining the last value of DMX signal,
◦
Off – set all DMX output channels to 0%,
◦ On – set all DMX output channels to 100%,
◦
Fixed – setting a user defined value.
12