PXM LED driver 3x6A/OC, Руководство пользователя

Страница: 22 / 33

16.1 Restore default settings
To restore the device to its default settings, press and hold the “ prev ” key
while switching on the device. One of the messages that will be displayed will
say
dFl , which means successful restoring to default settings (the “ prev ” key
has to be held down while powering on the device, until the dFl message is
displayed).
If this message is accepted by pressing “ enter ”, the default settings will be
restored. The user can also exit this menu level without restoring the default
settings. In order to do this, press the “
esc ” key.
Please note that after restoring to default settings, all the operating
parameters of the device will revert to the following ones:
• DMX address: 1
•
driver operating mode: RGB (3b – 3 byte)
• master mode: off
•
number of sent DMX channels: 128
• white balance: off
• no signal operating mode: program 1
• smooth function: off
22
ENTER
PRESSED
PREV
ESC