PXM Gate 4 DMX, Руководство пользователя

Страница: 12 / 27

with RDM protocol support [Auto discovery].
The device automatically searches when the device is started up.
[DMX Parameters] – configuration of DMX parameters for a given port,
times:
•
[Break time] – duration of a low state along the line at the beginning of
DMX packet transmission (range 176µs – 352µs)
• [MAB time] – (Mark After Break) – MAB length – interval after the
break that is present in each packet according to standard DMX512
(range 12µs – 88µs)
•
[MBF time] – (Mark Between Frames) – interval between DMX512
frames (channels). MBFs separate stop bits of one channel from the
start bits of another channel (range 0µs – 76µs).
[Output channels] – defines the number of channels sent out through
a given port
Settings:
[Auto]: the number of channels in a port is equal to the number of channels
received by the Art-Net protocol. You can force transmission of the selected
number of channels within the range: 0 – 512
[Net switch] – setting a network value in the Art-Net protocol. It is a common
setting for all the ports. The range is 0 – 127 (0x00 – 0x7f)
[Subnet switch] – setting a sub-network value in the Art-Net protocol. It is a
common setting for all the ports. The range is 0 – 15 (0x0 – 0xf)
[Stop DMX signal]
•
[On]: turns off DMX transmission if Art-Net signal is lost
• [OFF]: the ports continue to transmit the last values
12