PXM Gate 2 DMX RDM PoE, Руководство пользователя

Страница: 19 / 31

Additional information communicated by the LED indicators:
• if the screen saver mode is enabled or a “Art-Net Mute Indicators”
command has been received, all the diodes go out
• if the gate receives an “Art-Net Indicate” command, all the diodes start
blinking
•
if Art-Net packets stop being received by a given port, then, depending
on the Art-Net Timeout option:
◦
Timeout [Stop DMX signal]:
▪ if [Stop DMX signal] is off [Off] the port will continue to send
the last values and the diode will continue to blink in blue
▪ if [Stop DMX signal] is on [On] after the time period
[Timeout value] transmission through the port will stop
and the diode will go out
Two single-color diodes at the bottom:
•
the yellow one communicates receiving or sending a network packet
• the green one communicates the status of the Ethernet network, if the
diodes emits continuous light, the network is connected, if the diode is
not emitting light, there is no access to the network
19