5.)
Repeat steps 2 through 5 for each MiniMod unit. (Fig. 5)
6.)
Install assembled Rack series onto your rack mounts. (Fig. 6)
Страница 1: ...units ensure each unit has its own frequency it s broadcasting on as well as Major Minor Channel numbers To test simply connect your TV with a short piece of Coax cable to the RF Out of the Unit Then scan for channels on your test TV No HDMI needs to be connected for this test This will display our test pattern on your TV once you scan for digital cable channels By default our unit is set to QAM J...
Страница 2: ...NIMOD RACK kit comes with MiniMod 2 units and rack mount plate Fig 1 2 On the side panel of the MiniMod with the RF In Out unscrew the connector nuts from the RF connectors and remove the nuts and washers Fig 2 ...
Страница 3: ...Out connectors through the In Out holes in the rack mount plate Fig 3 4 Replace the washers and connector nuts Ensure connector nuts are snugly secured onto the plate Recommended to hand tighten using a 11mm socket Fig 4 ...
Страница 4: ...5 Repeat steps 2 through 5 for each MiniMod unit Fig 5 6 Install assembled Rack series onto your rack mounts Fig 6 ...
