PVI H264 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 15

PVI H264 Скачать руководство пользователя страница 4

Pro Video instruments

VeCaster Pro Series H264/H265 Encoder

3

LOGIN TO THE UNIT

The FACTORY DEFAULT IP address is 192.168.1.168

The Login is:

User = admin

Password = admin

You can reset the VECASTER by pressing for 10 seconds the reset button located on the rear panel to access,
make sure your computer is set to a STATIC IP ADDRESS as 192.168.0.100 See the PC SETTINGS instruction below
in this manual

PARAMETERS & CUSTOMIZATIONS

Each unit is ready to work plug n play by default above. You can also customize the unit parameters to fit your
application and needs. The unit comes with 2 independent Video Encoder Engines, each capable to output 5
different protocols ( RTMP / HTTP / RTSP / UDP / HLS ), Video Scaling, HEVC H.265 or H264 video formats
depending on your model, AAC or MP3 Audio Formats, FIVE CG Logo Generators, frame rate controls, etc.

DIRECT STREAMING & REPEATER SERVERS

Each unit has a built-in 1 Gigabit streaming server, so you can stream direct-to-internet to hundreds of players at
the same time (limit depends from the selected bitrate and the available bandwidth from your internet service
provider) there is no need for any additional hardware but it is suggested to run a Multicast IGMP enabled
switch if running multiple units. Should you need to do a wider distribution over the Internet, you can always
point the stream / receive the stream over one or multiple internet servers such as YouTube or similar, to
receive / repeat / redistribute your stream/s to millions of people.

INSTALLING MULTIPLE UNITS

To install multiple units on the same network, make sure to CHANGE the IP address of each unit BEFORE you
connect them to the same network, so there will be no IP Conflicts. Point your web browser to the IP address of
the unit (default is 192.168.1.168) Login to the unit, click NETWORK on the bottom, change the NETWORK
SETTINGS as needed by your application. As example you can set your units to IP addresses 192.168.1.168   169
170   171  … Write down these values, or put a sticker on each unit with the new assigned IP address so it will be
easy to login to the unit in future without the need to reset it. Depending on your setup it’s suggested to use a
Multicast IGMP enabled switch to help with the traffic.

«
...
2
3
4
5
6
...
»

Содержание H264
















Отзывы:

Нет отзывов