4
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Installation Time: 10
minutes
Helpful Tools (not included): Drill with 5/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
Although ramp is equipped with anti-slip traction tape, caution is required as some factors can
reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on
the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of
human stride. Caution should also be taken regarding type of floor finish and possible human
error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and
require users to use caution under field conditions as outlined here.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that the hook (top end) is pressed firmly against the step or platform before using.
•
When possible, use the clevis pins provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height
of step/platform not to exceed 6 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
CAUTION
•
When carrying ramp sections, always use handles and make sure hook-and-loop straps are
secure.
Clevis Pin
Qty. 2
AA
WARNING
3
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Installation Time: 8 minutes
Helpful Tools (not included): Drill with 11/64 bit (wood, metal, or masonry
depending on what type of surface you will be drilling pin holes into); Pen/
Pencil.
Ramps are designed for wheelchairs and electric scooters.
Ramps are rated for a 800 pound capacity; rating is based on double axle, evenly
distributed loads.
Although ramp is equipped with anti-slip traction tape, caution is required as
some factors can reduce slip-resistant capabilities. Such factors include, but are
not limited to, degree of wear on the shoe and flooring material; presence of
foreign material such as water, oil and dirt; length of human stride. Caution should
also be taken regarding type of floor finish and possible human error due to
physical and mental conditions. Anti-slip properties apply to laboratory conditions
and require users to use caution under field conditions as outlined here.
For your safety, a caregiver or aid should be present at all times when using any
ramp.
Proper setup is essential for safe loading and unloading.
Make sure that the hook (top end) is pressed firmly against the step or platform
before using.
When possible, use screws provided to lock ramp in place.
Safe lifting practices should be used when lifting product.
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a
maximum height of step/platform not to exceed 2 inches.
Failure to follow all warnings/instructions may result in ramp slipping off step
while occupied.
Please read and understand this entire manual before attempting to assemble, operate
or install the product.
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
Although ramp is equipped with anti-slip traction tape, caution is required as some factors can
reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on
the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of
human stride. Caution should also be taken regarding type of floor finish and possible human
error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and
require users to use caution under field conditions as outlined here.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that the hook (top end) is pressed firmly against the step or platform before using.
•
When possible, use the clevis pins provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height
of step/platform not to exceed 6 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
CAUTION
•
When carrying ramp sections, always use handles and make sure hook-and-loop straps are
secure.
Clevis Pin
Qty. 2
AA
WARNING
•
•
•
•
•
•
•
•
•
•
