10)
Place the spring (19) onto the lower air body (5) on top of the piston (6) then
place the upper air body (11) onto the spring and assemble using four machine
screws (16) using a 3/32” Hex key to tighten them down evenly.
11)
Thread the diaphragm (2) onto the end of the rod (7) until it is secure the continue
turning until it is square with the body of the valve.
12)
Place the o-ring (21) into the groove of the fluid section (3).
13)
Place the fluid section (3) onto the diaphragm and assemble using the four
machine screws (17) using a 3/32” Hex key to tighten them down evenly.
14)
Thread the plastic luer adapter (4) into the bottom of the fluid section (3) and
tighten using an adjustable wrench.
Note: Be sure not to over tighten the luer adapter.
Spare Parts
PVA offers standard spare parts kits for all dispensing valves. These kits are
stocked for immediate shipment and allow replacement of all wearable parts of the valve.
The spare parts kit for this valve, product number
CA3-SP
, includes the following
components:
CA3-SP Includes:
Qty
Part Number
Description
1
114-9539
Diaphragm
1
V300-UV
Luer Adapter
1
VLV-116B
Buna O-Ring
1
VLV-007B
Buna O-Ring
1
VLV-014B
Buna O-Ring
1
VLV-019B
Buna O-Ring
1
VLV-016K
Kalrez O-Ring
