GPS5 Time Receiver
Issue 1 (01 February 2018)
www.pvelectronics.co.uk
- 3 -
2.
ASSEMBLY
2.1 Prepare the GPS Module
First, apply the self adhesive foam pad to the back of the antenna,
then stick onto the plain PCB side of the GPS, oriented so that the
antenna cable can pass through the hole intended for it.
Now clip the antenna connector into the small matching connector
on the component side of the GPS module. It helps to press with a
hard surface, such as a small block of metal.
2.2 Jack Socket
Solder the jack socket to the adapter PCB.
