3. When you open this APP and enter the user’s interface, the Bluetooth will be
connected automatically (you can also pair it manually)
Safety Precautions
Be sure to comply with the following items to avoid damage or loss of property.
The following marks used for convenience of reference.
Warning
This symbol indicates danger.
Improper use can result in death or serious personal injury or loss of
property.
Warning
Attention
This symbol indicates warning.
Improper use can result in personal injury or material damage.
This symbol indicates attention.
The information listed help you use the product more easily or extend
product’s life.
Danger
Danger
Usage of Battery
The battery has a circuit protection device. Please do not disassemble the
battery, otherwise it will result in a short circuit or electrolyte leakage. Since
loss of eyesight may result when leaked fluid from battery gets into your eyes.
Please rinse your eyes immediately with a large amount of clean water, and
then seek medical attention.
In case of a short circuit, do not throw the battery into water or fire which will
cause heating, smoking, deforming or burning, even explosion.
Please charge the battery in a cool and dry place. If the battery is exposed to
extremely high temperature during charging, it will cause heating, smoking,
deforming or burning, even explosion.
Please do not use the printer near flammable and explosive materials such
as gas stations, fuel warehouses, etc.
Usage of AC Adapter
Original adapters only, otherwise it may lead to malfunction, such as heating and
smoking or further damages like fire or electronic shock.
No disassembling or modifying the adapter. Do not use the adapter with a
damaged power cord, otherwise it may result in electronic shock or further
damages like fire or adapter damage.
Do not pull the wires of AC adapter or put heavy thing on it. Otherwise it may
cause a fire or electric shock.
Do not use the AC adapter in an extremely high temperature.
Do not connect the AC power adapter in paralle.
Use only with the specified voltage, otherwise it may cause damage.
USB Connecting
If you use a smart phone equipped with NFC function, it will pair, match and connect
automatically when approaching to the printer. The phone will load its special label
APP automatically to prepare all the work before printing (it will pop up the app for
downloading at the first time).
NPC Transmission Connecting
PC Connecting
Connecting Method
2.The Smart phone equipped with NFC function will open its APP automatically
when approaching to the NFC area of the printer
APP Printing
Pairing is complete
when the Bluetooth
light on APP is lit
(Non-touch identification and interlinked technology)
PT
-
50DC
Bluetooth
Connecting
PUTY
Label
Use a degreasing cotton in
anhydrous alcohol swab to
gently clean the black part
of the print head as shown
or use PUTY professional
cleaning tape to clean it.
Please turn off
the printer first
Specification
Standard USB, Bluetooth (Android, IOS) , NFC
203dpi
Dots per line
384dot/line
Print speed
40mm/s
500h
Standby time
USB/Bluetooth/NFC
Connection mode
Penetration
Positioning mode
LPAPI/
Label
Printing instruction
Text/Image/Line(JPG, BMP, TIF, JPEG and other types are available)
Printing contents
Barcode printing
Connection mode
130
×
84
×
61(mm)
Dimension
Temperature
300g(with battery)
Weight
7.4V
Voltage
1350mAh
Electricity
Li-polymer
Type
Battery
DC 9V/1A
Charging via USB to computer system or power adapter
AC
100-240V
50
/
60Hz0
.
35A
Output
Charge mode
Input
Charger
Continuous length/Die-cut length
Roll
Max
52mm×50mm(width
×
diameter
)
0.05mm
~
0.25mm
Type
Form
Specification
Thickness
Consumables
Thermal printing
Print method
Black and white
Print resolution
Printing
℃～ ℃
50
-10
output
mode
1D/2D
Barcode
Printer
PT
-
50DC
DC
:
0D
:
30
:
40
:
0E
:
19
PT
-
50DC
DC
:
0D
:
30
:
40
:
0E
:
19
6.Setting
5.Editing
PUTY
Print the label
PUTY
Label
Create
a
new
label
Label
template
6
norm
2
slower
1
pc
Print the label
6
norm
2
slower
1
pc
PUTY
Standard
Hole
Mark
PUTY
PUTY
PUTY
Insert
Insert
Insert
PUTY
Label
PUTY
Caution
Please use PUTY original consumables only, otherwise it may cause
poor quality printing and damage to core of the printer.
Do not disassemble the printer without any instructions. Please contact
your dealer when in need of maintenance, adjustment and repair
(Maintenance will be charged when user dispatch or disassemble the
product without any instructions and cause damage even under
warranty).
Be sure to turn off the printer before replacing battery. Unplug the power
cord if you use the adapter before replacing battery.
Do not subject the product to any strong force or shock such as dropping,
hitting, or standing on the product. Otherwise, damage or injury may occur.
Do not spill liquid or insecticides on the product. Otherwise damage or
injury may occur.
To avoid injury, do not place or store the product on an unstable place.
Do not squeeze, mechanically vibrate or shake the battery, otherwise it
may result in a short circuit.
Usage of Battery
Please do not place the battery in direct sunlight or in dusty and foggy
locations.
Disconnect the adapter immediately and stop using the printer/adapter if
you notice abnormal odor or anything unusual which will prevent being
burned.
Usage of the Printer
Replace the battery when it cannot meet the performance requirements.
Please store it out of the reach of children.
Stop using it if you notice discoloration or deformation or anything unusual.
Usage of Battery
Usage of the Printer
Do not touch the print head when it is in a high temperature after printing,
otherwise it may cause scalding.
Remove the battery and store it separately if you do not intend to use the
printer for a long time, otherwise it may result in battery failure or even
fluid leakage which will damage the printer.
Warning
Original battery only. Do not replace the battery without any instructions,
otherwise it may cause explosion.
Other Precautions
Be sure to disconnect the power of the printer before cleaning it.
Cautions of the Print Head
The 3C Certificate, is China’s mandatory product certification system. “CCC” is
the abbreviation of “China Compulsory Certification”, which is in PRC more
commonly known as “3C Certification”. In view of protecting the consumers
and country and strengthening product’s quality, the government of PRC
applies this product quality standardization.
This label printer and power adapter has been certified by PRC of China CCC.
The User’s Guide aims to help the user to use and maintain PT-50DC Label
Printer. Some other products or company titles mentioned may be
trademarks or registered trademarks of other companies, which we have
applied here only for explanation, not involved in tort. All information in this
Guide are prohibited to be used, copied or transferred by any company or
individual without the formal written authorization of PUTY Technology.
3C Certification Standards
This product uses rechargeable lithium battery. In order to protect the
environment, please do not arbitrarily deal with used batteries.
Battery Recycling:
Installation and Handling of the Label Printer
Avoid pressing backwards when the paper cover is opened to
the maximum position.
Please disconnect the power of the printer and wait for about 2 to 3 minutes
before cleaning the print head.
Do not touch the heating section of the print head while cleaning it, otherwise
static electricity may damage it.
Attention: Protect your print head from scratches and other damages.
Be sure to dispose of used battery in accordance with the
relevant regulations.
Insert the label roll under instructions and pass through the
paper guide slot.
Make sure the print head is in locked status before feeding and
printing.
The print head is a precise and vulnerable part. Please do not
touch it with hands or sharp objects directly.
Please use original power adapter only.
1. Download the APP: Scan the QR code to download the APP. Or use the smart
phone equipped with NFC function to open its APP automatically when
approaching to the NFC area of the printer
4.Creat a new label or load a template
Maintenance Instruction
Maintenance and Repair
1. While dusting the outside and paper compartment of the printer:
2. While cleaning the print head:
3. If the printer gets soaked in water, please turn it off and remove the battery soon,
leaving it in open air.
2. Please clean the surface of posted item, when sticking the printer consumables.
1. The unopened products should be stored in room temperature.
4. If the printer won’t be used for a long time, please remove the battery and
store it separately.
Usage and Storage of Printer Consumables
When you hear the sound
DING three times.
Poor printer consumables.
Poor quality consumables.
Please use the original high quality
labels and ribbons.
The print head is not locked
tightly when printing.
Please lock the print head tightly.
Please try to adjust the print density
and the print quality.
Please use PUTY original consumables.
When you hear the sound
“ DI” two times during a
short break.
The battery may be weak.
Please charge it in time.
When the printer prints
without data.
The print quality is faint.
The labels become faint
even for few weeks.
The power turns off when
you try to print.
Please charge it soon.
Install the wrong side.
The printer has not been
cleaned for a long time that
the print head was polluted.
Please insert it correctly.
Please clean the print head.
Problem
Possible
causes
Remedy
The battery has run out.
Note: Do not use poor quality labels, otherwise it may cause damages to the
print head.
You can easily clean it using the following methods:
Please wring out the wet cloth and wipe them gently.
Please clean it occasionally which will help keep foreign matter from getting
inside the printer.