
Label Printer PT-50DC
Portable Label Printer
PT-50DC
User's Guide
Battery Cover
Rear
Confirm the Packing List
220V
power supply
Battery Charging
AC:100V
~
240V(50-60HZ)
Warning
Note
Main
for
functional
option
Main for setting
User's guide, warranty card
Battery(one cell)
(Pre - installed in the printer)
Power adapter
(
one
pc
)
Label paper (one roll)
Label paper
Battery Cover
Lock
Battery
PO
WE
R
FEED
POWER
FEED
PO
WE
R
FEED
Profile
USB Port
DC Power Port
Front
Cassette Cover
Tape Exit Slot
Feeding Key/
Setting Key
Power Key/
Function Key
LCD Display
L bel
a
Cutter
Read this manual carefully before starting and keep the manual
in a handy place for future reference.
PT-50DC printer (one set)
USB cable
Setting
Display
Status
Press the FEED button
to set the language of
the operation interface
English
/中文
Paper
Type
Language
English
Shutdown
mode
Never
Paper
type
Label
paper
Label
Normal
Black
Mark
Press and hold POWER button for 2 seconds to turn on the printer
Press the POWER button for 2
seconds, to turn off the printer
Press the
FEED
button, take a piece
of paper
.
Printer Parts
Before Using
Make sure you fully charge the battery before you first using PT-50DC. In order to
ensure the best effect of the battery, please charge it fully when it is not in use for long.
Steps before using, including ribbon loading, battery charging and paper placing.
Insert the AC adapter plug into the electrical
outlet, while inserting the DC adapter plug
into the DC connector of the printer.
Please use the original adapter only,
otherwise it may damage the printer.
PT-50DC label printer material:
width:12-52mm
the maximum diameter:50mm
1.Use only PUTY tapes with this
machine. Don’t use tapes
without PUTY mark.
Label Roll Loading
Note
Insert the label roll as shown
(with the side to be printed
on facing down)
USB
port
DC power port
POWER
FEED
2.Adjust the catch according to
the label width and push the
ribbon lock to the locked position.
3.Please close the cassette cover
after installing the label.
MAC
address
Automatic
calibration
Auto
Calibration
Gap
MAC
Address
DCOD
:
30
:
05
:
A6
:
03
Selftest
Restore
to
Factory
Settings
Attention:
1
2
Attention
The printer still works during charging.
Don’t remove the battery during charging.
Charging: The power indicator icon flashes
: The power indicator icon
is full and stops flashing
.
End of charge
Unlocked State
External Power Supply Indicator
Out of Paper State
Icon Area
Text Area
Power Level Indicator
Setting Mode/USB Mode
Wireless Communication/
Bluetooth
Wireless Communication/Bluetooth
Sign of connected through bluetooth.
USB Mode
Sign of connected through USB.
Setting Mode
Indicates the printer is in setting mode.
Unlock State
Indicates the print head is unlocked.
Out of Paper State
X
Out of Paper Error. When paper is run out or loaded incorrectly, this sign will
be indicated.
External Power Supply Indicator
Indicates an external power supply is connected. when inserting the external
power supply, it appears. By taking out the external power supply, it disappears.
Battery Level
While charging this sign flashes. Please charge up at low battery.
Text Area
The area shows some text information.
The printer will turn off automatically
after a standby period.
Initial Settings
You will enter the user’s setting interface when the printer turns on.
Toggle Option
Language
Toggle Option
Paper Type
Toggle Option
Shutdown Mode
Press the FEED button to
adjust the mode of shutdown:
10 minutes/20 minutes/30
minutes/never
Shutdown
Mode
Press the FEED
button to adjust
paper type. Black
Mark and Label
with re-calibration
function
Press the POWER button
to show the MAC address
of this printer
Press the FEED button to
automatically calibrate Black
Mark and Label only
Press the FEED button to
show the printer’s
information and the print
test
Press the FEED button to
restore factory settings
Print
SelfTest
Restore
factory
settings
Toggle Option
MAC Address
Toggle Option
Automatic
Calibration
Toggle Option
Print SelfTest
Toggle Option
Factory Settings
You can adjust the printer
when you see this icon
on the upper left screen.
POWER button: Short press to enter the setting
interface after turning on.
FEED button: Press it to check that paper can be
printed correctly by the printer. If not, make sure
that it snaps into place.
Auto Power Off
Turn On
Power Off
Feed Paper
Basic Functions
POWER button: