background image

Disclaimer

If used properly, your FullStop® product will be an effective deterrent. However, nothing can stop the 
efforts of the most determined thief, and to this end no liability is accepted for any loss and/or damage 
caused by any illegal activity including theft or vandalism. Liability is also not accepted for any loss and/
or damage arising from misuse, unauthorised repair or alteration and failure to follow the user guide 
directions. No form of consequential loss what so ever will be accepted.

© Copyright 2013. Purple Line Limited.

Web: www.purpleline.co.uk   E-mail: [email protected]   Tel: 01473 601200

Photographs for illustration purposes only. Actual product may differ slightly. 

Purple line Limited reserve the right to alter product specification without prior notice.

design...innovate...improve

Please store your keys in a safe place and remember to register your 

purchase. Your key number is located on both of the keys supplied and will be 

required in order to purchase replacement keys.

Registration is quick and simple, go to 

www.purpleline.co.uk/product-registration

 

Try to gauge the amount of gap and add the necessary amount of 1mm thickness Spacer 

Rings (5) between the Shield Plate (1) and the Lock Unit (3) as shown in Fig.A.

If you add too many Spacer Rings (5) it will not be possible to fully engage the Lock Unit 

into the Receiver Bolt and rotate the key to lock it. If this happens then simply remove 

one Spacer Ring at a time until you achieve a secure fitment.

Once satisfied with the fit between the Shield Plate (1) and the face of the wheel, the 
Spacer Rings (5) can be retained in place by securing the Lock Unit (3) to the Shield Plate 

(1) by tightening the Lock Unit Hex Screw (6) using the supplied 3mm Hex Key (7).

4.  The  Nemesis  Ultra  is  now  ready  for  use.  Please  check  the  Receiver  Bolt  torque 

setting after the first 100 miles (approx) and at regular intervals thereafter.

Spray the outside of the lock body with a light oil such as WD-40 or equivalent every 

sixteen weeks.

Installation (cont)

Maintenance

Отзывы: