RECOMMENDED OPERATING INSTRUCTIONS
cont .....
•
Consult the vehicle owner’s manual prior to using the
Kojack
and
its
components.
•
The vehicle must be attached to the tow vehicle before and when jacking.
•
Keep the work area clean and free of hazzards.
•
Keep children at a safe distance whilst working on the vehicle.
•
Kojack
•
Do not occupy the vehicle whilst lifting or working on it.
•
Chock all wheels before using the
Kojack
to lift the vehicle.
•
No person should place any portion of their body under the vehicle supported only
by the
Kojack
.
•
After the vehicle is raised to the correct height, secure it by placing a vehicle
support stand under the chassis.
OPERATING INSTRUCTIONS
TO LIFT
1.
Join the three sections of the Jack Handle together.
2.
Unscrew the Cap by turning it anti-clockwise on a minimal distance until it will
accommodate the Collar (aprox. 5cm above the Hydraulic Ram).
Fit the two sides of the Collar around the threaded section under the Cap.
Screw the Cap down to restrict vertical movement of the Collar between the Cap
and the Hydraulic Ram before fitting any Adaptor or Extension.
3.
4. Fit the Ball or Square Head Adapter over the Collar, depending upon application.
5. Insert the Hex Key into the Grub Screw located on the Adapter and tighten by
6. Position the
Kojack
under the ball socket or square mount on the vehicle.
7.
8. Insert the notched end of the Jack Handle into the
Kojack
Release
Valve and
rotate clockwise to close the valve.
9. Place
the other end of the
Jack
Handle in the
Tube
mounted
on
the
Kojack
and
move the Jack Handle up and down to raise the vehicle.
10. If
(Once the Release Valve is sufficiently turned it will release
the jack is unable to lift the vehicle to the desired height, insert the Jack Handle
into the Release Valve and gently turn anti-clockwise to
IMPORT ANT NOTICE
During shipment and handling, air can become trapped in the hydraulic system
degrading the performance of the
Kojack
.
This can also occur when changing and
as
far as it will go, place the jack horizontally with the Oil Filler Cap facing upwards
and remove the cap, which will allow the air to escape.
MANUAL Hydra Jack - RV Jacking Kit 4000kgs.indd 5
29/08/2013 10:45:39 AM
KoJack-HydraulicJack-8pp.ai 5
8/08/14 10:31 AM
