Intr
oduction
Installation
Maintenance
Tr
oubleshoot
W
arr
anty
Saf
ety
8
Step 3: Install the drinking water faucet
When installing an additional faucet, many times there are already pre-drilled
holes available. Many sinks have a soap dispenser or spray hose hole that
can be used for this purpose instead, if desired. Please consider hiring a
professional if there is not a pre-drilled hole.
Simply place the drinking faucet housing on the counter or sink where the
pre-drilled hole is separated by the provided rubber gasket. The stem from the
faucet should be accessible from under the sink.
Place 3/4” washer onto the threaded stem and secure under the counter.
Place 3/4” nut on threaded stem and secure by tightening until faucet can’t
move freely. Give the nut a quarter turn with the wrench to ensure to that the
faucet stays in place.
Locate purified water output line (white PE tube) and press into the drinking
water faucet stem quick-connect fitting and confirm that it is secure. Once
secure, slide the locking clip into place to avoid leaking
Certain faucet models may not be equipped with a quick-connect fitting.
Do not connect the other end to the Purlette system at this time
