Purkeys SafeFreight, Руководство по установке

Страница: 10 / 24

8
Step 2: Route the wires down the channel of the truck. Wire tie with existing
wires or fasten wires with provided clamps. Avoid sharp edges.
Step 1: Take the jacketed two-conductors and connect one end to the truck
batteries. Remove fuse from fuse holder until after installion of the door
sensor. After doing so, take the conductor and group it with the wires that
are left to be routed from the main harness (key switch wires, and door
sensor wire).
MAIN HARNESS/SENSOR POWER ROUTING
Installation Complete.