4
Gh-1
Gh-2
Electronic unit
The controller is in a black weatherproof plastic case.
To get to the operating elements and set up the unit, lift up the lid
Inside of the Electronic unit:
Battery compartment
24 hour Timer
Switch for shot frequency
Switch for volume
Switch for number of shots
Outside of the Electronic unit:
ON / OFF switch
Ignition cable with spark plug and ground wire
Solenoid valve with gas hoses
Gas hoses (Gh-1 and Gh-2)
5
Power supply / Batteries
Before working on the batteries or inserting new batteries,
make sure that the unit is turned OFF!
The ON / OFF switch is on the front of the electronic unit
and is labelled with I for ON and 0 for OFF.
To insert the batteries release the locking by pressing the plastic
plate direction the clock. The battery contact board
can then be removed upwards.
Important:
The batteries must be removed
when the unit is stored!
Open the lid of the electronic unit (108511) and make sure that the paper strip
between the batteries and the contact board is removed.
After this press the battery contact board back down to close it.
