User Manual
PT-SW-HD3A
7
5.
Operation of Switcher
5.1
Button Control
5.1.1
Manual Switching
When the switcher is in manual switching mode, the
AUTO
LED is off. Please press
the
SOURCE AUTO/3S
button to switch to the next input.
5.1.2
Automatic Switching
Press and hold the
SOURCE AUTO/3S
button at least three seconds to enable
automatic switching mode. The
AUTO
LED will turn to blue.
When in the AUTO mode, the switcher will switch according to the following rules:
Press and hold the
SOURCE AUTO/3S
button at least three seconds again to exit
AUTO mode. The active input source will not be changed.
By pressing the
SOURCE AUTO/3S
button, the input source can intentionally be
changed.
New Input:
Upon detecting a new input, the switcher will automatically select the
new input.
Reboot:
Once power is restored to the switcher, the switcher will output the last
active input signal, if available. Otherwise, the switcher will switch to the first
available active input starting at HDMI IN 1.
Source Removed:
When an active source is removed, the switcher will switch to
the first available active input starting at HDMI IN 1.
