User Manual
PT-SP-HD24DA
15
User defined EDID setting
Except directly invoking the built-in EDID, the specific EDID can be customized by
following the below operation process.
1)
Rename the user defined EDID according the following format.
EC_xx_xxxx_xxx.bin
EC: Represents EDID.
xx: Represents EDID ID. It is “11”.
xxxx: Represents the video parameter.
xxx: Represents the audio format.
Example: EC_11_720P_LPCM.bin
2)
Power on the splitter, and then connect to the PC with USB cable. The PC will
automatically detect a U-disk named of “BOOTDISK”.
3)
Double-click to open the U-disk, a file named of “READY.TXT” will be showed.
4)
Copy the user defined EDID (such as
EC_11_720P_LPCM.bin
) to the “BOOTDISK”
U-disk.
5)
Reopen the U-disk to check the filename “READY.TXT” whether automatically
becomes “SUCCESS.TXT”, if yes, the user defined EDID was imported into the
splitter and saved as its corresponding EDID ID successfully.
6)
Remove the USB cable, and then reboot the splitter.
7)
The new EDID now can be directly invoked via the 4-pin DIP switch. The EDID ID
and its corresponding switch status is shown in the below list.
ID
Switch Status
11
1011
