User Manual
PT-PSW-61
8
4.
System Operation
4.1
Button Control
Front panel buttons can be used for source selections, output resolution adjusting,
front panel buttons management, software updating and output screen setting.
(Please refer to chapter 2.1 ).
Here is the detail information for source selections:
There are 6 sources for choose in total, including HDMI1, HDMI2, HDMI3, HDMI4,
VGA1, VGA2. Video signals support auto-switching and manual-switching (factory
default). Press and hold for
SOURCE/AUTO
for
3 seconds or more
to enter in
auto-switching/ manual-switching mode.
Manual-switching:
Dial
◀
to select the previous source, dial
▶
to select the next source.
Auto-switching:
In this mode, select input source via front panel button (
◀
▶
) is not available, but
RS232 command and IR remote are able to switch mode. The auto LED turn green and
keep on.
The auto-switching mode abides by the following principles:
New input principle
Once detecting a new input signal, PT-PSW-61 would switch to this new signal
automatically.
