User Manual
PT-PSW-41RS
9
4.
System Operation
4.1
Button Control
Front panel buttons can be used for source selections, there are 4 sources for choose
in total, including HDMI, DP, DVI, VGA. Video signals support auto-switching and
manual switching (factory default).
4.1.1
Manual Switching
Press to
SOURCE/AUTO
button select one source, press again to select next source,
switching sequentially between HDMI, DP, DVI and VGA.
4.1.2
Auto Switching
Press and hold for
SOURCE/AUTO
button for
3 seconds or more
to enter in
auto-switching mode. In this mode, the Scaler Switcher will follow these rules to
select input source automatically.
New input:
Once detecting a new input signal, the Scaler Switcher would switch to this new
signal automatically.
Rebooting device
The Scaler Switcher have the ability to save the last configuration before losing
power. If the last switching mode is auto-switching, once rebooted, the Scaler
Switcher will automatically enter auto-switching mode, and then detect all inputs
and memorize their connection status for future rebooting using. If the last
displayed signal is still available, the unit will output the signal. If not, the unit will
detect all the inputs signals with priority from HDMI to VGA. When detected the
first signal, it will transfer to output.
