User Manual
PT-PSW-21C
1
1.
Product Introduction
Thanks for choosing the HDMI 2.0 2x1 Presentation Switcher. The switcher is
designed to switch HDMI input or USB-C input to one HDMI output. It supports video
resolution up to 4Kx2K@60Hz 4:4:4 8bit, 1080P, and 3D. Besides passing EDID
information from the display, there are multiple built-in EDID settings which can be
selected by the 4-pin DIP switch on the front panel.
The switcher supports stereo and multichannel audio on the HDMI inputs. In addition
to the audio embedded in the HDMI output stream, the audio is simultaneously
de-embedded to a balanced analog audio output. It also supports device extension by
providing one type-B USB port for host connection, and two type-A USB ports for HID
devices such as camera, microphone, keyboard etc.
The switcher features multiple methods of control. When in the AUTO mode, the
switcher will automatically switch to the first detected source device. When the
active source is removed, the switcher will switch to the lowest numbered input. The
switcher can be manually controlled by the front panel buttons and RS232 command.
CEC allows the display device can be controlled by the front panel buttons and RS232
CEC commands.
1.1
Features
⚫
18G 2x1 switcher with HDMI and USB-C inputs.
⚫
Supports automatic switching.
⚫
Controllable via front panel buttons and RS232.
⚫
Supports HDMI 2.0, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision, HDCP 2.2.
⚫
Provides charging on USB-C port up to 40W.
⚫
Provides USB data (USB 3.0/2.0) and 4K video transmission on USB-C port.
⚫
Balanced analog audio for audio de-embedding.
⚫
Peripheral units (e.g. microphone and camera) can be connected by type-A USB
(USB 3.0/2.0) ports and automatically switched along with HDMI and USB-C input
as USB DEVICES for corresponding HOST.
