User Manual
PT-PMS-82S
45
8.2.11
Third-party Device Control
The switcher supports RS232 pass-through control, the third-party device can be
controlled by RS232 command, and the command format as shown below:
Command
Function
Command Example
UARTPassThrough:Y.
RS232 mode selection:
Y=0,
Local Control:
The RS232
port of the switcher is used to
connect control device (e.g. PC) to
control the switcher.
Y=1,
HDBT Transmitter Pass
Through:
Establish RS232
pass-through communication
between the switcher and the
HDBaseT transmitter (e.g.
PT-HDBT-200-TX). The RS232 port
of the switcher can be used to
transfer commands to control the
third-party device which is
connected to the HDBaseT
transmitter.
Y=2,
HDBT Receiver Pass
Through:
Establish RS232
pass-through communication
between the switcher and
HDBaseT receiver
(e.g.PT-HDBT-200-RX). The RS232
port of the switcher can be used
to transfer commands to control
the third-party device which is
connected to the HDBaseT
receiver.
