PureTools PT-MA-HD88HDBT Скачать руководство пользователя страница 4

Страница: 4 / 75

User Manual

PT-MA-HD88HDBT

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before
using the device. Save this manual for further reference.

⚫

Unpack the equipment carefully and save the original box and packing material
for possible future shipment

⚫

Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.

⚫

Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.

⚫

Using supplies or parts not meeting the products’ specifications may cause

damage, deterioration or malfunction.

⚫

Refer all servicing to qualified service personnel.

⚫

To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.

⚫

Do not put any heavy items on the extension cable in case of protrusion.

⚫

Do not remove the housing of the device as opening or removing the housing may
expose you to dangerous voltage or other hazards.

⚫

Install the device in a place with sufficient ventilation to avoid damage caused by
overheat.

⚫

Keep the module away from liquids.

⚫

Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module
immediately.

⚫

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

⚫

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power
to the device before cleaning.

⚫

Unplug the power cord when left unused for a long period of time.

⚫

Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

Содержание PT-MA-HD88HDBT











































































Результаты поиска

Содержание PT-MA-HD88HDBT

Отзывы:

Бренды по названию

Популярные бренды

PureTools PT-MA-HD88HDBT, Руководство пользователя

Результаты поиска

Содержание PT-MA-HD88HDBT

Отзывы:

Бренды по названию

Популярные бренды