User Manual
PT-HDBT-1002
11
3.3 Connection Procedure
Step1.
Connect HDMI source (such as PC) to HDMI IN port of the Transmitter with an HDMI cable.
Step2.
Connect HDBT OUT port of the Transmitter to HDBT IN port of the Receiver through a
straight-thru CAT5e/CAT6 cable.
Step3.
Connect a HDMI display to HDMI OUT port of the Receiver with HDMI cable;
Step4.
When using the USB control, do the following:
a) Connect PC to the USB OUT port of Transmitter.
b) Connect Mouse/ Keyboard/U-disk to the USB IN port(s) of Receiver.
Step5.
When using the bi-directional RS232 control, do the following:
a) Connect PC to the RS232 port at either the Transmitter or the Receiver.
b) Connect a third-party device (such as projector) need to be controlled to the RS232
port at the other end.
c) Send RS232 commands to control the third-party device. For more details about
RS232 commands, please refer to the user manual for the third-party device.
Step6.
Connect with DC12V power adaptor to the power port of Transmitter, the Receiver will be
powered synchronously via PoC.
Note:
•
System Diagram shown in this manual is for reference only, more specific schemes depend
on real-time applications.
•
Connect HDBT ports via straight-thru CAT5e/6 cable with TIA/EIAT568B standard termin-
ations at both ends.
•
RS232 communication protocol: Baud Rate: 9600; data bit: 8; stop bit: 1; parity: none. HDBT
Transceiver receives RS232 control from devices with various baud rate (2400, 4800, 9600,
19200, 38400, 57600, 115200).
