17
Adjustable Delay Mode
In rare cases there may be a misalignment between the audio streamed
to the hearing instruments and the sound coming from the TV speakers
(echo) or even a misalignment between the streamed audio and the TV
picture (lip-sync). This may be evident in more complex audio setups
where the TV Streamer 2 is not connected directly to the TV (e.g. through
a set-top box or other auxiliary unit).
To overcome such misalignments the streaming delay from the TV
Streamer 2 can be adjusted as follows:
1. Make sure that the TV Streamer 2 is turned on and that your hearing
instruments are receiving the streamed audio.
2. Press and hold the pairing button (2 on page 6) for 3 seconds. Now the
TV Streamer 2 will enter into the adjustable delay mode, where the green
light indicator on the front of the TV Streamer 2 will blink once every 2
seconds. The yellow light indicator will be on whenever an audio signal is
present.
3. Use the “+” and “-“ key (7 and 8 on page 6) on the top of the TV
Streamer 2 to increase or decrease the delay of the streamed signal in 10
ms steps. The streamed signal can be delayed in the range of 0-250 ms.
4. When the optimal alignment between the audio streamed to the
hearing instruments and the sound coming from the TV speakers or
alignment between the streamed audio and the TV picture has been
reached, press and hold the paring button for 3 seconds. Now the TV
Streamer 2 will resume normal operation, indicated by the green light
indicator being constantly on.
