Puretec WaterMark Sparq S6, Руководство пользователя

Страница: 12 / 24

12 Installation & Operation Manual Copyright © Puretec Pty Ltd 2022
How To Operate The Tap
When the blue light is on, the tap is in 'Sleep Mode'. Press
any button once and the LED light will change from blue
to green to indicate that the tap is ready. Press the button
again to start dispensing water.
Hot Water Temperature Override
Press the setting button once to override 80 °C or
90 °C degree setting as a once off for unit to heat
water to 100 °C degrees. Unit will revert back to
original setting once heart 100 °C degree cycle has
completed.
Settings
Press and hold for 5 seconds to enter setting mode.
In setting mode the chosen temperature will be
blinking. Press the setting button to select the next
temperature level. When the desired temperature
setting is blinking, press any water dispensing
button below.
Cold Water
Press and release any button, once the light
is green press & hold the cold water button to
dispense cold water.
Sparkling Water
Press and release any button, once the light is green press & hold the sparkling
button to dispense sparkling water.
Hot Water
Press and release any button, once the light is green press & hold the hot water
button to dispense hot water (for safety reasons there is approx a 3 second time
delay before the hot water will dispense.
ECO Mode
ECO is an active energy saving mode that enables the Sparq S6 tap to detect the
activity in it’s installed environment. This allows the system to switch the boiling
water function into sleep mode when it is appropriate to save energy, save money
and save the planet. A concealed light sensor on the back of the tap automatically
turns the boiler off when the room is dark and restarts the boiler when the room is
light.
How To Operate The Tap
ECO Mode
Temperature
Settings
Cold Water
Sparkling
Water
Hot Water