Puretec Tripla Series, Руководство пользователя

Страница: 7 / 16

7 Copyright © Puretec Pty Ltd 2019 Puretec Tripla™ | Triple Action Tapware
Maintenance
Replacement of Ceramic Disc Cartridge(s)
1. Hot/Cold Outlet
• Remove hot and cold water indicator then release screw in lever and lift lever off,
now you can unscrew dome cap and loosen the cartridge lock nut.
• Lift out old cartridge and clean inside making sure no old O-rings are still stuck
inside cartridge housing.
• Insert new cartridge making sure O-rings on bottom of new cartridge have not
fallen off and lugs in bottom of cartridge line up with holes in cartridge housing.
• Now you can tighten lock nut with a torque wrench to 14 newton meters, then
reinstall dome cap, lever screw and hot and cold water indicator.
2. Filtered/Rain Ancillary Outlet
• Remove front button cover using fine-edged 1.2mm screwdriver.
• Unscrew handle then remove cartridge by unscrewing it anti-clockwise, using 5/8”
socket. Install cartridge by completing removal instructions as above, in reverse
order.
• Ensure cartridge is firmly tightened not over tightened.
Battery Installation - LED reminder light
1. Remove the black battery seat from the
faucet canopy.
2. Install battery into the battery seat,
positive side up.
Note: Red light flashes
twice and then followed
by the blue light.
3. Reinstall battery seat assembly into the
faucet canopy.
Important note: Battery must be replaced when changing cartridges.
WARNING!
This
product contains a battery. Accidental ingestion may occur and can be fatal. Please
keep out of reach from infants. If you suspect an accidental ingestion please contact
emergency services.
5. Red light flashes indicates your cartridges
are due to be changed (usage has
exceeded 3,000 minutes or 12 months).
Please change the battery when
changing the filter cartridge(s) .
Positive
side up.
Negative on
the PCB.
4. Blue light flashes during
normal operation.