5. INSTALLING & FILLING
(CONT.)
Before Opening the Skimmer Box:
- Open all the jets in your pool by turning them gently to the left (anti-clockwise)
- Unscrew and discard the stainless steel transport screw that may be holding
down the top lid (visible in image #2)
FILLING & INSTALLING THE FILTER
12
Grab the top lid with two hands
and twist anti-clockwise to
detach (can be quite stiff).
Insert the filter and place it
over the circular holding piece
so it sits tight.
Lift off the lid to reveal the
basket grill underneath.
Insert the basket grill into the
top of the filter so it sits tight.
Lift out the basket grill and
place aside.
Press the basket down gently
to ensure a tight fit.
See inside the skimmer box the
circular holding piece to which
the filter needs to sit into.
Replace the top lid and put a
hose into the skimmer box as
seen above to fill.
1
5
2
6
3
7
4
8
Fill until the water line sits an
inch or so below the headrests.
You may need to adjust this
depending on bather load.
9
