English | 4
OPERATING INSTRUCTIONS
CLEANING & MAINTENANCE
-
Insert the end (hollow plug) of the cable of the AC/DC adapter into the DC socket
(Marked as DC12V) on the back of the air purifier (The DC adapter is for vehicle
use only).
-
Insert the adapter in the electric socket or the vehicle’s cigarette lighter socket.
-
Press the power switch, which will activate the unit and the red LED light.
-
The fan is independently controlled. The switch on the side of the PM 210UV turns
the fan “ON” for increased effectiveness, or “OFF” for virtually silent operation.
Please ensure unit is turned off and unplugged before performing any cleaning or
maintenance.
Cleaning the Dust Collection Plates:
-
The dust collection plates should be cleaned about every 20-30 days, or when
covered with dirt and residue. Cleaning the dust collection plates is very simple.
-
Twist the knob on the right hand side of the air purifier and pull the plates out.
-
Wipe the plates off with a damp cloth. If there is difficult-to-remove residue on the
plate, you should use a mild household cleaner, such as detergent, to help remove it.
-
Dry the plates.
-
Reinsert the plates back into the air purifier. Twist the handle to lock them in place
and so that the unit will operate again. Please refer to the lock and unlock symbols
on the handle of dust collection plate.
Settings:
Power:
- “Hi” - runs at full capacity.
- “Lo” - Automatically runs in intervals of 35 seconds “on” and 60 seconds “off”.
- “Off”.
Fan:
(1) “Off” - turns fan off, resulting in virtually silent, ionic air purification.
(2) “On” - increases air flow through unit, increasing effectiveness.
1. Removing the dust collection plates.
2. Wiping dust collection plates clean.
