-
DO NOT immerse the controller/s in water or get them wet.
-
Clean the surface of the cord with neutral detergent if the cord is dirty and wipe it dry
with soft cloth.
-
DO NOT dry clean this blanket as it could damage the heating elements.
-
DO NOT use industrial solvents such as benzene, kerosene or similar solvents to clean it.
-
To clean the blanket, hand wiping it down with a soft damp cloth with very mild deter
gent, mildly process at a maximum washing temperature 30°C. Allow it to dry
thoroughly before using or storing it. When washed, drape it over a clothes line to dry.
Do not use clothes pegs to secure it.
-
Machine washing of the blanket is possible; however, hand wiping it down will prolong
the life of the blanket. To machine wash, remove the controller/s and place the blanket
in a net bag and seal it. Use a small amount of detergent and set the washing machine
to a “Delicate Wash” with a maximum temperature of 30°C. When washed, remove the
blanket from the net bag and drape it over a clothes line to dry. Do not use clothes pegs
to secure it.
Connecting and removing the controller
To remove the controller, lift the locking tab up with your finger and pull the plug
directly out. Do not pull the controller cable and do not try to pull the controller plug
out without lifting the locking tab as you will damage the socket. To connect the
controller lift the locking tab up with your finger and pull the plug directly in.
After use
When the blanket is not in use, please switch the controller to the off position; remove
the plug from the power socket. If the blanket is not to be used for a long period of
time, store the blanket in a cool and dry place.
English | 4
CLEANING & MAINTAINANCE
When not in use and before cleaning the blanket, disconnect it from the mains.
Disconnect the controller from the blanket.
