05. Description of sensor operation
An ohmic sensor allows to detect the workpiece surface when the torch moves down.
When the torch cap touches the workpiece, the “Sensor 1” signal appears. If for any reason
the first sensor does not work and the Z axis continues moving down, then dZ mm (Fig. 9)
will trigger sensor 2 and two signals will immediately appear at the output: “Sensor 1” and
“Sensor 2”. In this case, to obtain the torch height above the workpiece surface, it is
necessary to correct the Z coordinates by the distance dZ.
The sensitivity control is designed to reduce the sensor sensitivity in the case of strong
interference, which can cause false activation, or to increase the sensitivity in the case of
contaminated workpiece.
06. Warranty
Warranty service life is 12 months from the purchase date.
The warranty is only preserved if operation and scheduled maintenance conditions are
observed.
1. General provisions
1.1. If the goods is purchased as component parts, Seller shall guarantee operability of
each component part individually, but is not responsible for the quality of their joint
operation (incorrect selection of component parts. In case of any questions you can consult
the company’s specialists).
1.2. Seller does not provide any warranty for compatibility of the purchased goods and the
goods possessed by Buyer, or purchased by them from any third parties.
1.3. Specifications and configuration of the product can be changed by manufacturer
without prior notice due to continuous technical improvement of the products.
2. Conditions for access to warranty service
2.1. The goods is accepted for warranty service in the same configuration in which it was
purchased.
3. Warranty service procedure
3.1. The warranty service is carried out by testing (checking for) the declared malfunction
of the product.
3.2. The warranty service is carried out if the malfunction is confirmed.
4.The warranty does not cover glass, electric lamps, starters and consumable materials,
and:
4.1. any goods damaged due to improper transportation and storage conditions, incorrect
connection, offdesign operation, or in conditions not stipulated by the manufacturer
(including temperature and humidity beyond recommended range), damaged due to effect
of exterior circumstances (power supply voltage surges, natural disasters, etc.), and
mechanically or thermally
damaged goods.
4.2. Goods with traces of effect and (or) ingress of foreign objects, substances (including
dust), liquids, insects and those with extraneous texts.
4.3. Goods with traces of unauthorized tampering and (or) repair (tampering signs,
primitive soldering, traces of component replacement, etc.).
4.4. The goods having self-diagnostic means indicating improper operation conditions.
Содержание PLL-R2
