User Manual
PT-SP-HD12-4K
7
8. Installation
9. Notice
1.
Switch off all devices, including monitors.
2.
Connect to the displays.
3. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.
4.
Plug in 5V DC power supply.
5.
Power on the HDMI monitors.
6. Power on the HDMI source.
1.
While connecting a new monitor to the splitter under mode6(auto EDID) & mode7(EDID learning), experien
-
cing a short period of time without display might be expected. The splitter will do Automatic EDID learning
which analyzes the newly connected monitor to see if the EDID for the HDMI input is necessary to update!.]
2.
For firmware update through Mini-USB, users MUST turn the power off, set the dip switch to “ON”, and then
connect an Mini-USB cable between PC and device. Open the firmware update software,
[1]
set the correct
com port and baud rate (57600 is recommended),
[2]
click the “File” button to direct to the firmware HEX or
BIN file, power on the device and press “Program MCU” symbol to firmware update. Once update process is
done, please power off the device and set the dip switch back to “1”.
Broadcasts HDMI signal to 2 DVI displays!
