www.purelink.de
8
Section 2:
Operation approach
Mode Selection
Pressing UP
(
↑
)
or DOWN
(
↓
)
button to select among 4 different modes
– Save Mapping Mode, Preset
Mapping Mode, Default EDID Mode, EDID Learning Mode, and Status Mode
1.
Save Mapping Mode
1)
Pushing “Left (
←
)”button, to enter the Save Mapping Mode.
2)
Use the “Right (
→
)“ input push button to get into the selection of the mapping configuration, and use
“UP (
↑
) & DOWN (
↓
)” (1~8) to choose which set you want to save current input/output mapping
3)
After you select the desired mapping configuration number, the number will be twinkled. Then, press
the SET button, the setting will be saved successfully.
4)
press LEFT(
←
) button to go back to pre-layer
2.
Preset Mapping Mode
1)
Pushing “Left (
←
)”button, and use DOWN (
↓
) button to enter the Preset Mapping Mode.
