User Manual
PT-E-HD50
4. Check the status of connecting
In upper part, it will reveal the Valens Mode and Source type.
If Connected successfully, you will see the shown as below :
•
Normal
•
If fail to connect, you will get the status as below :
4.1
Indication radio the light to recognize the connection condition
•
To review the Status of connecting, HDBaseT Manager analyze in 4 directoins
Item
What is this for?
1
HPD
Hot Plug Detect when you plug in or unplug, re-initializing the HDMI link if necessary
2
Cable len
To measure the cable length
3
Video BER
The Bit Error divided of transferred bits during a studied time interval (video bit error rate)
4
MAXERR
MAXERR is used to denotes the largest error between the samples of the original signal and the reconstruc-
ted signal
13
