PureLink by Dtrovision
63
is open, command "21 89 01 50 57 30 0A 0D " can be sent. After receiving feedbacks
from AV devices, close the port *255OPC!
For a complete list of command characters and their functions, see examples below.
Example:
Command Codes
Action
*255OPO01@001!
Open communication port with a device that is
connected to Output #2 Extender at 4800 bps baud
rate
O01“abcdefg
”
Send command (abcdefg) to output #1
*255OPC! Close
communication
port
*255OPO02-06@004!
Open communication port with a device that are
connected to Output #2 ~ 6 Extender at 19200 bps
baud rate
*255OPO05@004,O07@008!
Open communication port with a device that is
connected to Output #5 at 19200 bps baud rate and
Output #7 at 115200 baud rate
OALL"pm
"
Send command (pm) to all open ports
O02"purelink
"
Send command (purelink) to output #2
O01-04"pm-256x
"
Send command (pm-256x) to output #1 ~ 4
OH: 3G/HD-SDI Output Scaler timing select command
The "OH" is an initiation command for 3G/HD-SDI Output Scaler timing selection. The
characters and numbers that follow the "OH" command tell the system, set scaling
timing on selected Output. The last character “!” is found at the end of a command
code which tells the system to execute the command. For a complete list of command
characters and their functions, see examples below.
OH command only applies 3G/HD-SDI Output boards
T01 NTSC
T05 1920x1080i
@50
T09 1920x1080p
@30
T02 PAL
T06 1920x1080i
@50
T10 1920x1080p
@50
T03 1280x720p @50 T07 1920x1080p @24
T11 1920x1080p @60
T04 1280x720p @60 T08 1920x1080p @25
Audio Matrix Volume Configuration
Audio Matrix volume configuration commands are for the green block Audio Matrix Router
