PureLink HX-6600, Руководство пользователя

Страница: 10 / 18

Copyright 2007 Dtrovision LLC.
10
The functions of the switches are as follow.
•
Main power switch: Matrix power on/off
•
Remote controller receiver: receive infrared ray from remote controller
•
Reset key: initialize the matrix
•
Input key: select channel from 1 to 6
•
Output key: select channel from 1 to 6
•
Create (CRE) key: change input/output channel
•
Preview (PRE) key: preview the status of current connection
•
Enter (ENT) key: save current selection
•
Cancel (CAN) key: cancel current selection
•
EDID (EDI) key: read EDID data from display, which is connected to output ports
Switching channel by Push button
Input/output channel check:
Preview (PRE) button
→ Enter (ENT) button: present set channels are displayed in sequence
Input/output channel change
Create (CRE) button
→ Input button to be set → Output button (Multiple selection) → Enter (ENT) button: the
selection of the channels are changed
* In order to cancel, then press cancel button.
Example: CH# 1 input to 1,2,3,4 output same pictures
Create -> Input 1 -> Output 1,2,3,4 -> Enter
Save EDID data
EDID (EDI) button
→ Output button to be set → Input button to be set → Enter (ENT): read EDID data of
display and write to matrix (Should connected matrix output to display (HDTV) and display power on)
Switching Channel by Remote Control unit
Create ->IN ->1 ->OUT -> 1,2,3,4-> Enter
3-2 Product number setting
- Product ID setting (DIP switch)
•
It sets each address of matrixes if many matrixes are used.
•
It sets in binary values.
Ex)
Product ID = 01 (00000001b) -- 1 ON, 2 OFF, 3 OFF, 4 OFF, 5 OFF, 6 OFF, 7 OFF, 8 OFF,
Product ID = 10 (00001010b) -- 1 OFF, 2 ON, 3 OFF, 4 ON, 5 OFF, 6 OFF, 7 OFF, 8 OFF,
Product ID = 23 (00010111b) -- 1 ON, 2 ON, 3 ON, 4 OFF, 5 ON, 6 OFF, 7 OFF, 8 OFF
D0 D1 D2 D3 D4 D5 D6 D7
LSB MSB
•
The product number is the value set in deep switches of the equipment and can be set in the values
of 1 ~ 255. The value “0” cannot set the channel.