PureLink by Dtrovision
7
Video Connection
1. Turn off all components before connecting.
2. Connect your video source’s DVI output port to the DD-2100’s DVI input port using
standard DVI cables (not included).
2. Connect your DVI display’s DVI input port to DD-2100’s DVI output port.
3. Plug the 12V power supply into the switch’s power input port.
4. Plug the 12V wall mount power supply into the wall outlet.
5. Turn on power switch
6. Turn on your displays.
7. Turn on your video source.
External EDID and Internal EDID Set up
I
. External EDID Set up
1, Unplug all DVI cables,
2, Connect Monitor or HDTV to “
OUTPUT 1
” on the back of the DD-2100
3, Turn on the DD-2100 and HDTV
4, Press and hold “EXTERNAL EDID” button on the front of the DD-2100 for 3
seconds until RED LED light is on.
5, Turn off DD-2100
6, Reconnect all device following above “
Video Connection
”
II
. Internal EDID Set up (Factory Default Setting)
1, Unplug all DVI cables
2, Turn on DD-2100
3, Press ”INTERNAL EDID” button on the front of the DD-2100 for 3 sec until RED
LED light is on.
4, Turn off DD-2100
5, Reconnect all device following above “
Video Connection
”
** What is EDID?
E
xtended
D
isplay
I
dentification
D
ata is a VESA standard data format that contains basic
information about a display and its capabilities, including vendor information, maximum
resolution, color characteristics, factory pre-set timings, frequency range limits, and
character strings for the monitor name and serial number
