6
FAQs
Reach Pureit @
1860-210-1000
1860-180-1000
www.pureitwater.com
How does Pureit Advanced Plus RO+MF+MP purify
water?
Pureit Advanced Plus RO+MF+MP has a 6-stage
purification process which ensures you to get water that is
‘As Safe As Boiled Water’ and also removes excess Total
Dissolved Solids (TDS) to make your water tastier.
Stage 1st
Pre-Sediment Filter:
Removes fine and coarse particulate
impurities/dirt and improves the life of the carbon filter.
Stage 2nd:
Pre-RO Carbon Filter:
Removes chlorine and organic
impurities like harmful pesticides. It also absorbs bad taste
odour causing organic compounds from water.
Stage 3rd:
Mini Filter:
Filters water further to ensure removal of finer
particulate impurities.
Stage 4th:
RO Membrane:
Removes dissolved salts, hardness,
pesticides, fluoride and heavy metals like arsenic, lead and
mercury. It also removes microbial contaminants like
bacteria, virus, protozoa and cysts.
Stage 5th:
Micro Filtration Membrane(MF):
Micro Filtration Filter is added Post-RO, which ensures that
the water is purified not once but twice.
Stage 6th:
Post-RO Carbon Filter:
Last level of purification acts as a
polisher and enhances the taste of purified water.
What is the storage capacity of Pureit Advanced Plus
RO+MF+MP?
Pureit has Storage Tank capacity of upto 5 litres. The
storage tank is fully automatic and well shielded and as
and when you take water out of the tank, the purification
process starts automatically again and refills the storage
tank.
How much time does it take to purify water in Pureit
Advanced Plus RO+MF+MP?
Pureit can purify water up to 10-12 litres per hour
depending on the device you have purchased. However,
the time taken to purify depends on the life of the filters,
the input water pressure, TDS and other impurities present
in the water.
Does Pureit Advanced Plus RO+MF+MP remove arsenic,
fluoride and nitrates?
Like other ions, the RO technology can also remove arsenic,
fluoride and nitrates.
How will I get new consumables/membranes replaced?
You need to call the Pureit helpline and order the
consumables. The customer care specialist will visit your
place and replace the consumable/Germkill Kit at a
nominal cost.
What are all the consumables which are to be replaced?
You need to replace / clean the sediment filter basis water
quality and GKK approximately every 1 year from date of
installation.
Can I drink the first purification cycle of water from the
purifier?
No, recommendation is to throw the first cycle of water
that is filled in the storage tank when the new Pureit
purifier is installed and also whenever the Germkill Kit are
replaced.
Can I open and service my purifier?
It is not recommended to open and service purifier by an
individual. Call our Pureit helpline if you face any issue
which requires servicing and opening of the purifier.
Can I use reject water?
It is not recommended to use the reject water for any kind
of human/pets consumption (drinking or cooking). It may
be used for gardening or cleaning floors.
What should I do if any part of purifier is broken?
Please call the Pureit helpline. Our technicians will visit
your house and guide you on the repairs required. There
will be a nominal visiting charge and you would need to
buy the parts required.
What should I do if there is leakage from the purifier?
First switch off the ball valve if you find any leakage from
the purifier and turn off the power switch. Check for any
visual improper fitment and then call our Pureit helpline
number and register a service request.
How long the stored water in Pureit Advanced Plus
RO+MF+MP can be used for drinking?
You can use stored water for 2 days. If it is not used for
more than 2 days we advise you to discard that water, refill
and then consume.
