4
5
HOSE CRADLE & HOSE ASSEMBLY
Protrusion
to lock
Handle
Removal
Button
Handle
Hole
Handle
Release
Canister
Pedal
Base
Body
Guides
· HOSE CRADLE ASSEMBLY
· Set hose cradle on the top of the cleaner. (Fig. 1)
· Using a Phillips screwdriver, secure the 3/4-inch screw.
· HOSE ASSEMBLY
· Insert the body end of hose into the hose hole on the top of the cleaner. (Fig. 2)
· Line up circular tab on hose cuff with inner groove. (Fig. 2)
· Connect and twist clockwise to secure proper hose connection. (Fig. 3)
· Place hose in hose cradle. (Fig. 4)
· Insert the base end of the hose into the hose inlet on the base of the cleaner. (Fig. 5)
HANDLE ASSEMBLY
BASE ASSEMBLY
· HANDLE ASSEMBLY
· Insert handle in the handle hole on the top of the body. (Fig. 6)
· HANDLE DISASSEMBLY
· Push the handle removal button.
· Pull handle upward.
· BASE ASSEMBLY
· Set the body on the top of the base. (Fig. 7)
· Use both sides of the guide feature on the base.
· BASE DISASSEMBLY
· Push the release canister pedal.
· Lift up the body.
Fig. 7
Fig. 1
Hose
Base Hose
Connector
Fig. 5
Fig. 6
Fig. 2
Fig. 3
Fig. 4
