Puregas Altec AIR P8400W, Руководство пользователя

Страница: 84 / 110

Altec AIR P8400W Air-dryer User’s Guide
Page 84 of 110 P017585 – Rev. A
10.2 Six Month Maintenance
MODEL:
P8400W LOCATION NAME:
SERIAL NUMBER: ADDRESS:
DATE INSTALLED:
Maintenance Interval (Months)
Procedure Section 6 12 18 24 30
Install Six Month Maintenance Kit P011766 11.6
    
Read & Record Flow Rate ( FLOW ) 8.4.4.1
Measure & Record
Compressor 1 Amp Draw
9.2
Measure & Record
Compressor 2 Amp Draw
9.2
Measure & Record Incoming Voltage
(must be 210 - 230 VAC)
9.4
Test High & Low Outlet Pressure Alarms 9.14 &
9.15
    
Set System Pressure (50 PSI) 8.12
    
Set Static Pressure (17 PSI) 8.13
    
Set Outlet Pressure 8.14
    
Test Consistent Heatless Dryer Cycling 9.6
    
Test Precooler Fans 9.9
    
Test Safety Relief Valve 9.10
    
Test Compressor ON/OFF Cycling 9.11
    
Test Compressor Excessive Run Time Alarms 9.12
    
Test Humidity Alarm &
System Shutdown
9.13
    
Test Air Fittings for Leaks 9.16
    
Clean Precooler Coils
    
Visually Inspect Inside & Outside of Unit for Loose
Wiring or Hardware
    
Maintenance Performed by:
Date of Maintenance:
NOTE: COPY OR PRINT THIS PAGE AND KEEP IT WITH THE AIR-DRYER